SIP_VoIP_Settings_v1_0_en.zip This application can be used to configure VoIP settings on the terminal UI. You can create new VoIP profiles and modify the existing ones, and create and modify VoIP parameters and NAT/Firewall traversal settings and that are normally not visible on the device UI, such as codec settings and SIP domain-specific NAT/FW settings. It is also possible to save all the VoIP profile settings to a text file.

Manual Configuration

Here you can find Nokia SIP settings for voip setup configuration guide with Fonosip.com service.

STEP 1

Go to Tools / Settings / Connection / SIP settings. Create the following profile

Profile Name: FonoSIP.com

Profile: IETF Default

Access point: (your WLAN AP name)

Public user name: 812345@fonosip.com ( Instead of 812345 account number example, use the account number assigned to you when signed up for FonoSIP.com service. When recorded your phone will show sip:812345@fonosip.com )

Use Compression: No

Registration: "Always on "

Use Security: No

STEP 2

You do not need to enter Proxy Server settings

Proxy Server Address: none

Registrar Server:none

Realm: none

User Name: none

STEP 3

Enter the following for Registrar Server settings

Registrar Server: fonosip.com (When recorded your phone will show sip:812345@fonosip.com)

Realm: fonosip.com

User Name: 812345 (Instead of 812345 account number example, use the account number assigned to you when signed up for FonoSIP.com service. )

Password: Enter the password that you chose when you signed up for the service.

Transport Type: UDP

Port: 5060

STEP 4

Go to connection / Internet Tel. Settings

Create a new profile for "fonosip"(812345), name it "fonosip"

In Connectivity / Internet tel. / Preferred profile

Choose "fonosip"

STEP 5

Reboot your phone. Once your phone is back on it will automatically register to FonoSIP.com.

Once it is registered you can start making calls.

Default call type: To switch between normal GSM calls or VOIP calls, navigate to Tools / Settings / Call / Default call type. Select Cellular to make normal calls to the phone number or Internet to use VoIP to call the number or address

Make Calls!

To dial any phone number that is part of the NANP (North American Numbering Plan), you must dial:

1 + Area Code + Phone number

To dial any phone number that is outside of the NANP (North American Numbering Plan), you must dial:

00 + Country Code + City Code + Phone number

For example if you want to call Brazil (country code 55) phone number in Rio de Janeiro (city code 21) you must dial 00-55-21-phone number.