FonoSIP.com
lang world mobile site

Sipura SPA-2100

The Sipura Broadband Router with 2 Phone Ports is a kind of "splitter" for your Internet connection. Just connect your DSL or Cable Modem to the Router, and all the computers in your home or office can share the Internet -- all at the same time. The built-in 1-port switch lets you attach 1 local PCs directly, or daisy-chain out to more hubs and switches as your network grows.

The two standard telephone jacks on the Router enable our high-quality feature-rich telephone service through your high-speed connection even while you're surfing the Internet. Each phone jack operates independently -- like having two phone lines.

STEP 1

Connect the ethernet cable from your PC to the LAN port of the router. Then connect your cable or DSL modem's ethernet cable to the router's Internet port. If necessary, disconnect the RJ-11 telephone cable of your telephone from the telephone wall jack. Then connect that end to the router's phone 1 port. If you have a second telephone plug that into phone 2 port. Now, power up your PC, cable and DSL modem and your router.


STEP 2

You will need the setup instructions provided by your Internet Service Provider (ISP). If you do not have this information, then contact your ISP before continuing.

The instructions from your ISP tell you how to setup your PC for Internet access. Because you are now using the router to share Internet access among several computers, you will use the setup information to configure the router instead.

STEP 3

Make sure that your PC's ethernet adapter is set to 'Obtain an IP Address Automatically'

Open your browser and enter 192.168.0.1 . This web-based configuration is not passworded.

STEP 4

Click on Admin Login and the click on the Router Tab.

Choose the Internet type in the drop down.

Sipura SPA-2100 Router Tab

STEP 5

Next, choose from the main menu 'Voice' and then Line1 . Enter your Voip.Brujula.net virtual number into the User Id: field and VoIP.brujula.net SIP password into the Authenticate Password: field. Enter voip.brujula.net into Registration/Proxy Server: field.

Repeat Step 5 for line 2.

Proxy:   voip.brujula.net
Display Name:   Enter your full name, this will show up as part of your callerid.
User ID:   Enter the sip number you chose when you signed up for VoIP.brujula.net service.
Password:  

Enter the password that you chose when you signed up for VoIP.brujula.net service.



STEP 6

For the best voice quality, leave the Preferred Code: at default . If you have limited bandwidth choose G.729 . Do not choose G.723 as it is not supported by VoIP.brujula.net.

Audio Configuration


STEP 7

Click on the "Submit All Changes" button at the bottom of the form.


STEP 8

Make calls!

-- FonoSIP.com -- Search Site -- About Us -- Add Credit -- Mobile Site -- Login -- Service Numbers -- Help -- Swag -- Write to us info@fonosip.com -- Voicemail 1-360-226-7665 -- FonoSIP.com © 2010

Powered by BA.net iGames


FonoSIP.com supports Xten / Counterpath SIP softphones for Windows, Mac, iPhone and Linux. Internet telephony equipment such as Linksys PAP2, Cisco, Sipura, Nokia N71. Apple iPhone, iPod Touch, iPad. Android. Codec G729. Fring Mobile. Bring your Own Device BYOD. We also support SIP Trunking, replace your phone lines. Asterisk PBX, TrixBox.